C.C. Designs Swiss Pixie Sunflower Lula Birthday Card

For young girls I think little people stamps make cute birthday cards.  I created birthday cards for the young women in our church who range in age from 12-18.  It was time to create some cards to have on hand for upcoming birthday. One of the girls favorite colors were orange and black. The image from C. C. Designs Swiss Pixie Sunflower Lula was great for creating a card with that color scheme.

I stamped the image with Memento Tuxedo Black Ink, since I would be doing Copic Coloring, on Gina K. Designs 80# White Cardstock and ran it through my Silhouette Cameo with the PIXScan Mat to cut an outline around the image.  The Copic Markers used were: YR09, YR07, YR04; YR12, YR14, YR15; W7, W8, W9; YR09, Y19; W9, E49, E59; E49, E47, E55; E00, E00, E01.

In keeping with the color scheme I die cut a rectangle from Gina K. Designs 120# Black Cardstock with Simon Says Stamp Bundle of Stitched Frames.  I found some orange paper in my stash of cardstock that had faint yellow sunflowers and cut it to be just 1/8″ smaller than the die cut rectangle and adhered them together using the Scotch ATG Gun.  I pulled some black and white gingham ribbon from my stash and wrapped it around the background retangle, tying the bow on the left and placing it in the bottom third of the card.  Then the panel was adhered to a top folding A2 cardbase made from Gina K. Designs 120# White Cardstock with Tombo Mono Multi Glue, which gives you a few moment to move things around and center it perfectly on the cardbase.

I wanted the focal image to pop from the page so I die cut My Favorite Things Vertical Greetings Die from 80# White Cardstock and adhered it to the cardbase with 3M 1/2″ Foam Tape.  The focal image was then centered on the vertical greeting die cut and adhered with some more foam tape.

The sentiment is from is from Whimsy Stamps Party Mini Letter Seals.  It was stamped on 80# white cardstock and then run through the Big Shot with a Spellbinders circle die.  Foam tape was added to the back of the sentiment and it was tucked under the ribbon bow.  A little Ranger Multi Matte Medium was used to ensure it remained in place.

The final embellishment was to scatter some Doodlebug Beetle Black, Pretty Pink Posh Charcoal, Doodlebug Tangerine, Pretty Pink Posh Tangerine Sequins and the card was done.

Masculine Silhouette Hello Cards

I needed some masculine hello cards, which I find more of a challenge, but I like the way these turned out. The Echo Park Dots & Stripes paper are beautiful yet simple.

As with the previous hello cards, This time I did not cut the word from the center of a rectangle.  I cut the word only from a scrap of paper with the Brannboll Fet font cut at 120 pt.  At the same time I cut a .04 outline of the word from Paper Accents Gold Mirror Cardstock.

I created a rectangle of the polka dot paper with the Big Shot and the smallest Lawn Fawn Stitched Stackable Rectangle.  I created a slightly larger rectangle from Paper Accents Gold Mirror Cardstock with the Simon Says Stamp Bundle of Stitched Shapes rectangle.

To assemble the card the polka dot and gold rectangles were adhered together using the Scotch ATG Glidder.  Darice Adhesive Fun Foam was added to the back of the panel and then it was adhered to a A2 side folding cardbase made from Gina K. Designs 120# Kraft Cardstock.  The hello cutout and outline were adhered together using Elmer’s Craft Bond Adhesive Spray.  Strips of 3M 1/2 Foam Tape were added to the back of the word and it was adhered to the front of the polka dot panel with Tombo Mono Multi Glue and the card was done.

For this card the hello word was cut from the center of a 6″ x 4 3/4″ rectangle.  The rectangle was run through the Big Shot with the rectangle from Simon Says Stamp Bundle of Stitched Shapes.  A small rectangle of Paper Accents Gold Mirror Cardstock was adhered to the back of polka dot rectangle behind the word cutout with Scotch Tape.  Darice Adhesive Fun Foam was then added to the back of the panel for dimension.  The rectangle was adhered to the a side folding A2 cardbase made from Gina K. Designs 120# Kraft Cardstock.

Small strips of 3M 1/2″ Foam Tape were added to the back of the word cutout, but even with the gold foil behind it and the added dimension it was getting lost so I ink blended some Barn Door Distress ink to the edges and this helped.  The backing on the foam tape was removed and the word was placed back into the rectangle and the card was done.

This card is exactly the same as the first but I used a different color of the Echo Park Dots & Stripes paper.

PRODUCTS USED:

  • Echo Park Dots & Stripes Gray and Gold and Red and Gold Cardstock
  • Gina K. Designs 120# Kraft Cardstock
  • Paper Accents Gold Mirror Cardstock
  • Simon Says Stamp Bundles of Stitched Shapes Rectangle die
  • Lawn Fawn Small Stitched Stackable Rectangles die
  • Silhouette Word Cut – Brannboll Fet 120 pt. / Offset .04
  • 3M 1/2 Foam Tape
  • Darice Adhesive Fun Foam
  • Scotch Tape

Gold Rose Background Hello

This is the third design of hello card I created.  I found this beautiful paper in the Craft Smith Blush Glam Cardstock Pack.  I think it made a stunning card.

As with the previous hello cards, I used my Silhouette Cameo to cut a 6″ x 4 3/4″ rectangle and centered the word hello in that shape.  The font used was Brannboll Fet cut at 120 pt.

I ran the rectangle through the Big Shot with the Simon Says Stamp Bundle of Stitched Shapes rectangle to give it a stitched border.  I cut a small rectangle of Paper Accents Gold Mirror Cardstock to place behind the word cutout and taped it in place with regular scotch tape.  Darice Adhesive Fun Foam was added to the back of the panel for added dimension.  An A2 side folding cardbase was made from Gina K. Designs 120# White Cardstock and the hello panel with adhered with Tombo Mono Multi Glue.

It was very pretty and I could have left it that way and been happy with it, but I felt that it needed a little something extra to break up all the gold foil.  I die cut the My Favorite Things Hybrid Camellia die from Doodlebug White Sprinkles Vellum and the leaves from Grafix 30# Leaf Green Vellum with My Favorite Things Layered Leaves die and glued it in the upper right corner of the card with Ranger Multi Matte Medium and liked it much better.

Very simple to make, but an elegant hello card to send to someone.

PRODUCTS USED:

  • Gina K. Designs 120# White Cardstock
  • Craft Smith Blush Glam Cardstock Pack
  • Paper Accents Gold Mirror Cardstock
  • Doodlebug White Sprinkles Vellum
  • Grafix 30# Leaf Green Vellum
  • Simon Says Stamp Bundles of Stitched Shapes Rectangle
  • My Favorite Things Hybrid Camellia die
  • My Favorite Things Layered Leaves die
  • Silhouette Word Cut – Brannboll Fet 120 pt. / Offset .04
  • Darice Adhesive Fun Foam
  • Tombo Mono Multi Glue
  • Scotch Tape
  • Ranger Multi Matte Medium

Silhouette Hello Card

I send out Hello or Welcome cards to all the new people who move into our church.  In January there were quite a few.  I wanted to create some cards with a large die cut “hello” but I didn’t have a die large enough for what I wanted, so I decided to use my Silhouette Cameo.  I picked out some patterned paper that I liked and created a cut file with the Brannboll Fet font at 120 pt.  For these two cards I used paper from the DCWV Happy Day Cardstock Stack.

For the first card I created a rectangle that was 6″ by 5″ and centered the word “hello” in the rectangle.  Once cutting the file was complete, I removed the word cutout from the rectangle and set it aside to use on the next card.  I ran the rectangle through the Big Shot with both the WPlus9 Gift Card Layers Rectangle and the largest Simon Says Stamp Stitched Rectangles to create a frame.  I added 3M 1/2″ Foam tape to the back of the frame and added it to a side fold A2 size card made from Gina K. Designs 120# White Cardstock.  I felt that something was missing when the word rectangle was placed in the frame and so I decided to back the word with a rectangle of matching pink cardstock I had in my stash and liked it much better.  It was glued to the back of the patterned paper with Tombo Stamp Runner Dot Adhesive and then both were glued into the center of the frame with Tombo Mono Multi Glue.

For added embellishment a flower was created from Doodlebug White Sprinkles Vellum by die cutting and assembling My Favorite Things Hybrid Camellia flower.  The leaves were made from Grafix 30# Leaf Green Vellum and cut with the My Favorite Things Stitched Flowers.  These were glued together using Ranger Multi Matte Medium and then glued to the lower right of the card front.

For the second card I used the hello word I had set aside earlier.  It is hard to tell in the pictures, but the patterned paper flowers have gold centers.  I die cut a rectangle using Simon Says Stamp Bundles of Stitched Shapes Rectangle die and glued it to a side folding A2 cardbase made from Gina K. Designs 120# White Cardstock.  To make the word stand out on the rectangle I created a .04 outline of the word in my Silhouette and die cut it from Paper Accents Gold Mirror Cardstock.  Because mirror cardstock is such a slick surface I sprayed the back of the patterned paper “hello” with Elmer’s Craft Bond Spray Adhesive to glue the two cutouts together.

Even with the gold outline the “hello” word faded into the patterned paper rectangle and so I cut a smaller rectangle from pink cardstock I had in my stash with the largest Avery Elle Small Stitched Stackable Rectangles and then glued the “hello” word to the center with Tombo Mono Multi Glue. Darice Adhesive Fun Foam was added to the back of the pink rectangle and then adhered to the cardbase with Tombo Mono Multi Glue.

The flower and leaves for this card were created by die cutting My Favorite Things Stitched Flowers die from Doodlebug White Sprinkles Vellum and the leaves were cut from Grafix 30# Leaf Green Vellum with the same die. The flower center was die cut from Paper Accents Gold Mirror Cardstock with My Favorite Things Plentiful Petals die.  Ranger Multi Medium Matte was used to created the flower and glue it to the lower right of the card front.

PRODUCTS USED:

  • Gina K. Designs 120# White Cardstock
  • DCWV Happy Day Cardstock Stack
  • Paper Accents Gold Mirror Cardstock
  • Doodlebug White Sprinkles Vellum
  • Grafix 30# Leaf Green Vellum
  • My Favorite Things Stitched Flowers die
  • My Favorite Things Plentiful Petals die (flower center)
  • My Favorite Things Hybrid Camellia die
  • Simon Says Stamp Bundles of Stitched Shapes Rectangle die
  • Silhouette Word Cut – Brannboll Fet 120 pt. / Offset .04
  • My Favorite Things Hybrid Camellia die
  • Simon Says Stamp Shapes Rectangle die
  • WPlus9 Gift Card Layers
  • Lawn Fawn Small Stitched Stackable Rectangles die
  • 3M ½” Foam Tape
  • Silhouette Word Cut – Brannboll Fet 120 pt. / Offset .04
  • Tombo Mono Multi Glue
  • Tombo Stamp Runner Dot Adhesive
  • Ranger Multi Matte Medium

Penny Black Mimi’s Heart Birthday Card

I make a lot of cards with little girl images and they turn out so cute for the young women in our church.  I’m always looking for something new.  I recently purchased Penny Black Mimi’s Heart to give to a young girl with a February birthday.  I like the way it turned out.

I wanted to play up on the heart Mimi was holding and so I went to my cardstock store, as Michael calls it, to find some patterned paper I liked.  Since this one had multiple colors it gave a lot of options for creating the card.

I started with an outline of the image cut with the Silhouette Cameo and then stamped the image with Memento Tuxedo Black Ink, which is Copic safe.  I colored the image to compliment the patterned paper with the following colors: BG18, BG15, BG13; RV14, RV13, RV11; E55, E53, E51, E50; E01, E00, E000.

I cut a scalloped heart using the Spellbinders Scalloped Heart Die and then ran it through the Big Shot with the Cuttlebug Cross My Heart Embossing Folder for added dimension.  3M 1/2″ Foam Tape was added to the back of the focal image and the heart and both were applied to a square of patterned paper.  To allow enough room for people to add their birthday greetings to the inside of the card I wanted it to be a top folding A2 card, made for Gina K. Designs 120# White Cardstock.

I didn’t like how the square patterned paper looked on the A2 card, so I pulled some dark turquoise paper from my stash to add behind the patterned paper.  Added was created by die cutting the bottom edge with the Spellbinders On the Edge Heart die. The sentiment from Simon Says Stamp Big Birthday Wishes was stamped with VersaMark Ink and heat embossed with Gina K. Designs Detailed White Embossing Powder.

There was too space between the sentiment and the heart border and so two thin strips of white cardstock were added with Tombo Mono Multi Glue.  For added shine Martha Stewart Sugar Cube Hearts were added to each of the embossed hearts with Multi Matte Medium and Silver Stickles was added to the dots on the heart the little girl was holding and the card was done.

PRODUCTS USED:

  • Penny Black Mimi’s Heart
  • Simon Says Stamp Big Birthday Wishes
  • Copic: BG18, BG15, BG13; RV14, RV13, RV11; E55, E53, E51, E50; E01, E00, E000
  • Silver Stickles
  • Patterned Paper
  • Simon Says Stamp Big Birthday Wishes
  • Cuttlebug Cross My Heart Embossing Folder
  • Spellbinders – Hearts Scalloped
  • Martha Stewart Sugar Cube Hearts
  • Darice Adhesive Fun Foam
  • 3M ½” Foam Tape

C.C. Designs DoveArt Studios Himalayan Poppy Birthday Card

I am always looking for pretty flower stamps and when I saw the Himalayan Poppy stamp from C. C. Designs I knew it would make a beautiful card.

I stamped the image with Memento Tuxedo Black ink because I wanted to color it with Copic Markers.  Since there wasn’t a matching die available I used my so I used my Silhouette Cameo PIXScan Mat to cut around the image.  The Copic Markers used were: G24, G94, G99 ; BG18, BG15, BG13; B00.

To assemble the card i die cut some Gina K. Designs 80# White Cardstock with the largest Avery Elle Small Stitched Rectangle Stackables and then ran it through the Big Shot again with the Darice Basketweave Embossing Folder.  To accent the color of the flowers I cut some matching cardstock 1/8″ larger than the die cut rectangle and adhered the two together with Tombo Mono Multi Glue.

A top folding cardbase was made from Gina K. Designs 120# White Cardstock and the embossed panel was applied using Darice Adhesive Fun Foam and Tombo Mono Multi Glue.  3M 1/2″ Foam Tape was added to the back of the focal image flowers and added to the embossed panel.

The sentiments is from My Favorite Things Celebrate You stamp set.  It was stamped on some Gina K. Designs 120# Black Cardstock with Simon Says Stamp Clear Embossing Ink and Gina K. Designs Fine Detail White Embossing Powder was added and heat set with the Marvy Embossing Tool.  It was then cut into a double fishtail banner and adhered to the card with 3M 1/2″ Foam Tape.  To add a little more interest Gold Tinsel Stickles was added to the stamen of the flowers and the card was done.

PRODUCTS USED:

  • C. Designs DoveArt Studios Himalayan Poppy
  • My Favorite Things Celebrate You
  • Darice Adhesive Fun Foam
  • 3M ½” Foam Tape
  • Gold Tinsel Stickles
  • Darice Basketweave Embossing Folder
  • Copic Markers: G24, G94, G99 ; BG18, BG15, BG13; B00
  • Avery Elle Small Stitched Rectangle Stackables
  • Tombo Mono Multi Glue

Penny Black Swinging Valentine’s Day Card

I don’t know what it is about the cute girl and boy images from Penny Black but I really like them.  The Swinging stamp set was perfect for a Valentine’s Day card for Michael.  I am so grateful I get to sit beside this wonderful man who makes every day better in my life.

I stamped the image with Memento Tuxedo Black Ink on Gina K. Designs 80# White Cardstock.  Since there isn’t a matching die I decided to try the Silhouette Cameo PixScan Mat to cutout the image and it worked perfectly. I colored the image with the following Copic Markers: R29, R27, R24; E55, E59, E49; E50, E53, E35; E00, E01, E11; B26, B24, B23; B32, B34, B95; G24, G99; E55, E57, E59 (wood), B000, B0000.

I wanted a sky background behind the image so I used some Canson Cold Press 140# Watercolor Paper and die cut it using the Avery Elle Small Stitched Stackable Rectangle.   I applied Distress ink onto a smooth surface and using the wet on wet method dropped the following colors; Salty Ocean, Chipped Sapphire, Faded Blue Jeans, to create the sky.

I die cut Hero Arts Love from red cardstock and coated it with Simon Says Stamp Clear Embossing Powder and added Recollection Clear Embossing Powder.  It did this several times.  You can create a similar look using Glossy Accents, but I prefer the smooth look of multi layers of embossing powder.

I placed both the focal image and sentiment die on the sky background to determine placement for the secondary sentiment.  I prepped the area with an anti static pad and stamped the sentiment from Avery Elle Simply Said: Love set with Simon Says Stamp Clear Embossing Powder and added Ranger Fine Detail Gold Embossing Powder, heat setting it with the Marvy Embossing Tool.

It was now time to assemble the card.  To add a splash of color and help the focal image panel stand out I die cut a rectangle of red cardstock with the Simon Says Stamp Bundle of Stitched Shapes rectangle.  I glued it to the watercolored background with the strong adhesive from the 3M ATG gun.  Both were glued to a top folding cardbase made from Gina K. Designs 120# White Cardstock with Tombo Mono Multi Glue.

The focal image was added to the watercolor panel using 3M 1/2″ Foam Tape.  Four more “love” dies were cut with heavy weight white cardstock. Since the top of the “l” would rest on the focal image the top of the letter was removed with scissors to ensure it would lay flat on the panel. These were adhered together using Elmer’s Craft Bond Spray Adhesive and applied to the watercolor panel with Tombo Mono Multi Glue.  Glossy Accents were applied to the small hearts in the image and the card was done.

PRODUCTS USED:

  • Penny Black Swinging
  • Hero Arts Stamp and Cut Love
  • Avery Elle Simply Said: Love
  • Lawn Fawn Small Stitched Stackable Rectangles
  • SSS Bundle of Stitched Shapes Rectangles
  • Gina K. Designs 120# White and Red Cardstock
  • Canson 140# Cold Press Watercolor Paper
  • Copic: R29, R27, R24; E55, E59, E49; E50, E53, E35; E00, E01, E11; B26, B24, B23; B32, B34, B95; G24, G99; E55, E57, E59 (wood), B000, B0000
  • Distress Ink: Salty Ocean, Chipped Sapphire, Faded Blue Jeans
  • Ranger Fine Detail Gold Embossing Powder
  • Stickles Tidings Gold
  • Inkssentials Glossy Accents
  • 3M ATG
  • Tombo Mono Multi Glue
  • 3M 1/2″ Foam Tape
  • Elmer’s Craft Bond Spray Adhesive

Nuts About You Valentine’s Day Card

This Valentine’s Day card was made with my daughter Aimee and her family in mind.  She has four amazing, wonderful, smart kids and I wanted them to remember how much I loved them.  I thought the My Favorite Things Nuts About You stamp and die set would be perfect.

I found the wood grain paper from Around the Block Ash Filigree paper pack and die cut it using Simon Says Stamp Bundle of Stitched Shapes rectangle.  Next, I die cut three hearts from red cardstock that I had in my stash of papers with the Spellbinders Heart dies.  On one of the hearts I stamped the sentiment from My Favorite Things Nuts About You with Simon Says Stamp Clear Embossing Ink.  I used my MISTI to stamp the sentiment since it was textured cardstock and I wanted a clean, crisp image.  I covered the sentiment with Gina K. Designs Detailed White Embossing Powder and heat set it using the Marvy Embossing Tool.

I stamped the cute squirrel and acorn on Gina K. Designs 80# White Cardstock with Memento Tuxedo Black ink and colored it with the following Copic Markers: W2, W3, W4, W5, R20; R27, R22, YR24; E30, E33, E35/E55, E57, E59

It was not time to assemble the card.  I placed the red hearts on the wood grain panel.  The two side hearts where adhered with Tombo Mono Multi Glue and the center heart with 3M 1/2″ Foam Tape for dimension.  The squirrel was placed on the right heart since it was facing left and the acorn on the left heart using 3M 1/2″ Foam Tape.  I like the card, but it needed something more so I stamped some smaller acorns from the Simon Says Stamp Nutty Over You stamp set and fussy cut them using scissors and scattered them on the hearts.  It still needed something more and since I had been using the Impression Obsession Heart of Hearts die on a previous card I die cut it again from a scrap of red cardstock and scattered them around the card front and that was just what it needed.

The side folding cardbase was made from Gina K. Designs 120# Ivory Cardstock, but when I went to place the wood grain panel I felt it needed a little pop of color and so I cut a panel of red cardstock 1/8″ larger than the wood grain panel and adhered them together with Tombo Mono Multi Glue and then using the same glue adhered them both to the cardbase and the card was done.

PRODUCTS USED:

  • Gina K. Designs 120# Red Cardstock
  • Fancy Pants Trend Setter Woodgrain Paper
  • MFT Nuts About You Stamps
  • SSS Nutty Over You
  • Copic: W2, W3, W4, W5, R20; R27, R22, YR24; E30, E33, E35/E55, E57, E59
  • Gina K. Designs Fine Detail White Embossing Powder
  • SSS Bundle of Stitched Shapes
  • Spellbinders Hearts
  • Tombo Mono Multi Glue
  • 3M 1/2″ Foam Tape

Impression Obsession Heart of Hearts Valentine’s Day Card

This Valentine’s Day Card was made for my daughter Janae.  Her favorite colors are Turquoise, Teal, and Purple.  I thought that the Impression Obsession Heart of Hearts die would make a pretty card using all those colors.  Placing the different colored hearts took quite a bit of time, but I really like the way it turned out.

I started by cutting two circles using My Favorite Things Pierced Circles STAX, one from a deep purple and another from a light turquoise.  I pulled the papers from my stash of scrap paper.  Next I die cut the purple circle with the Impression Obsession Heart of Hearts Die to form the base of my focal image.  I covered the light turquoise circle completely with 3M ATG Adhesive, which provided a sticky surface for placing all the multi-colored hearts.  I then cut Heart of Hearts die from a light turquoise, deep teal, light purple and silver mirror cardstock and randomly placed them into the purple die cut heart.

The top folding cardbase was made from Gina K. Designs 120# White Cardstock, but I felt it was too stark for the purple heart so I raided my paper stash and found a pretty light gray patterned paper from Around the Block called Ash Filigree.  This is cardstock I’ve had for years and so it probably isn’t available anymore, but anything similar would work.  I die cut the patterned paper using Simon Says Stamp Bundle of Stitched Shapes and adhered it to the cardbase with Darice Adhesive Fun Foam to add some dimension.  I added more fun foam to the purple heart and adhered it towards the top of the cardbase.

The sentiment is from the Pink & Main Love die, cut from Paper Accents Silver Mirror Cardstock.  I placed it on the card to determine where to stamp the secondary sentiment from Avery Elle Simply Said: Love with Simon Says Stamp Clear Embossing Ink and covered it with Ranger Silver Embossing Powder.  I die cut four more “Love” dies from heavy weight white cardstock.  Since the “L” would be resting on the purple heart I marked the die cuts where they would need to have that part of the letter removed and adhered them together using Elmer’s Craft Bond Adhesive Spray and then adhered them to the card front with Tombo Mono Multi Glue and the card was done.

PRODUCTS USED:

  • Gina K. Designs 120# White Cardstock
  • Around the Block Ash Filigree Cardstock
  • Paper Accents Silver Mirror Cardstock
  • Pink & Main Love die
  • MFT Pierced Circles STAX
  • SSS Bundle of Stitched Shapes Die
  • Impression Obsession Heart of Heart Die
  • Avery Elle Simply Said: Love
  • Elmer’s Craft Bond Spray Adhesive
  • Tombo Mono Multi Glue

Heart of Roses Valentine’s Day

I really love the Simon Says Stamp Heart of Roses die and decided to use it for a Valentine’s Day card this year cutting it from mirror cardstock.  I think it has an elegant look to it.

I began by watercoloring a background with Distress Inks: Picked Raspberry, Aged Mahogany, Festive Berries; Candied Apple, Worn Lipstick on Canson Cold Press 140# Watercolor Paper.  Once it was completely dried I ran it through the Big Shot with the largest Lawn Fawn Small Stitched Stackable Rectangles.

The Simon Says Stamp Heart of Roses die and Hero Arts Love and Hearts die were cut from Paper Accents Gold Mirror Cardstock and then four more times from Gina K. Designs 120# Ivory Cardstock.  All were glued together using Elmer’s Craft Bond Spray Adhesive to provide dimension.  Since the Love die would rest on the heart I marked where it would rest and cut away the additional under layers so that it would rest flush on the heart die.

After determining the placement of both dies on the watercolor background a secondary sentiment from the Avery Elle Simple Said: Love set was stamped with Simon Says Stamp Clear Embossing Ink and then covered with Ranger Super Fine Detail Gold Embossing Powder and heat set with the Marvy Embossing Tool.

A top folding cardbase was made from Gina K. Designs 120# Ivory Cardstock.  Darice Adhesive Fun Foam was added to the back of the panel and adhered to the card with Tombo Mono Multi Glue, which give you a few second to move it around and ensure it is placed correctly on the cardbase.  The heart and sentiment dies were adhered using Elmer’s Craft Bond Spray Adhesive and the card was done.

I like the look of it so much that I decided to recreate the card with Silver Mirror Cardstock and darker more burgundy colored background created with Winsor & Newton Alizarin Crimson, Permanent Rose; Ivory Black watercolor half pans.

This was was made for my son and daughter-in-law whose favorite color is burgundy and love silver more than gold.  For this card a silver mirror rectangle was cut with the Simon Says Stamp Bundle of Stitched Shapes Rectangle.

Products Used:

  • Gina K. Designs 120# Ivory Cardstock
  • Canson 140# Cold Press Watercolor Paper
  • Paper Accents Gold Mirror Cardstock
  • Hero Arts Love and Hearts Die
  • SSS Heart of Roses Die
  • Avery Elle Simple Said: Love Stamp
  • Distress: Picked Raspberry, Aged Mahogany, Festive Berries; Candied Apple, Worn Lipstick
  • Lawn Fawn Small Stitched Stackable Rectangles
  • Gina K. Designs 120# White Cardstock
  • Paper Accents Silver Mirror Cardstock
  • Simon Says Stamp Bundle of Stitched Shapes
  • Winsor & Newton Alizarin Crimson, Permanent Rose; Ivory Black
  • Tombo Mono Multi Glue
  • Elmer’s Craft Bond Spray Adhesive